AN: If you like what you are reading, you can help by giving my novel Rating.
Before anyone knew it, the mid-year exams were here, I blasted through the written papers, only having so trouble with so spelling in the Elven language exam, as for the practical exams, it was alright. I had no issues slinging the spells required for Advanced Spell Theory, for Advanced Combat & Tactics, I sparred with an instructor and demonstrated the sword forms, for Blacksmithing, we did a whole Forged in Fire episode where we needed to forge a weapon displayed before us, which in this case was a Quillon Dagger, for Array Architecture, we were tasked with making a detection array, and then, there is my final practical exam that was just around the corner, Enchanting.
The practice of enchanting in itself was not the hard part, if I just followed the basic thod we were taught, I doubt I would have any trouble passing the enchanting practical exam tomorrow, but I did not just want to pass with so bog standard enchanting style, I wanted to pass with distinction by expressing my own unique style in this world.
So before the exam, after doing a lot of window shopping and seeing many examples in the market, I went to my Blacksmithing instructor, Professor Steelbeard, and asked him if he had anything I could practice my enchanting on, he pointed to an assortnt of rejected weapons that were destined to be lted down.
Having an idea of what I wanted my style to be, I started practicing and refining what I envisioned in my mind. And on the day before my exam, I lifted my latest practice work and smiled.
***
The next day, I was standing in the enchanting workshop with the rest of my classmates as the invigilator read out the rules of the exam. It all boiled down to us picking out sothing to engrave, be it a weapon, armor, or jewelry, and we will not be graded so much on the effect of the enchantnt, but the technique applied.
So when the tir started, I went to collect the equipnt I wanted to enchant and materials I was going to use like I was so MasterChef contestant, after grabbing a shortsword to use as my base, I went to collect the other materials and tools, but unlike the other contestant- I an my classmates, I went to the section that stocked tals and grabbed myself so Mana Copper.
Like the Mana Steel my word is made of, Mana Copper is a tal that has been artificially imbued with mana, and it is most likely the cheapest mana conductive tal around.
As for what I did, with the shortsword and Mana Copper? Well, I applied so blacksmithing… not exactly, but close enough, luckily the practical exam was taking place in a well-stocked and equipped workshop, so I had all the clamps and tools to do what I wanted.
I started by securing the shortsword to the bench and started sketching out my desired design on the shortsword with a pencil, this was followed by grabbing so hand-engraving tools. Mana Copper wire and a few other tools.
When I had everything I wanted gathered on my workbench, a few of the invigilators around gave questioning looks but kept silent. It was only Professor Bixby who gave my gathered material a look of interest, especially because the material I gathered did not include any mana-conductive ink everyone else was using.
When I was ready, I started the engraving process. The engraving tool bit into the steel of the shortsword as I used a small hamr to tap on the back of the engraving tool. But a few minutes in, I realized that I was going far too slow for the allotted ti given, so I decided I was going to need to use an advantage the other kids around most likely did not have, Aura, and nowhere in the rules for this exam say I could not use aura.
I activated my aura, catching the attention of almost everyone in the room, and with my enhanced strength and pushing my aura into the engraving tool, I forwent the small engraving hamr and carved a groove along the lines I sketched, only slowing down to either rotate the shortsword or reposition myself.
It took slightly longer than the ti it took to sketch my engraving on the shortsword, but I was done. I checked my engravings to see if there were any mistakes and found a few places that needed a touch-up before I proceeded with the next part.
After the touch-up, I looked around to see how much ti I had left and noticed that more than half the ti had passed, and as I looked around, I saw that more than a quarter of the class was already done with their inscriptions and were waiting for the ink to dry so they could activate the enchantnts and test for any flaws.
Knowing that I was cutting it close with what I had left to do, I got back to work.
Now that the engraving was done, it was ti to inlay the engraving with the Mana Copper wire, but first, I had to purposely scuff up the inner grooves of the engraving on the count of not using a hamr and just pushing through with the engraving tool in a smooth motion with my aura empowered body, because if I did not do so, the softer mana copper may have trouble gripping onto the engraved grooves when I inlay the mana copper wire.
After I was done scuffing up the inner grooves of the engraving, I started inlaying the mana copper wire into the grooves with the help of the peen side of a ball peen hamr to smash and deform the softer mana copper into the grooves.
When I was done with the inlaying, the only thing left was to sand away the deford mana copper that did not fit into the grooves and I would be done.
“You all have ten minutes left.” the invigilator announced.
I looked down at my work and internally cussed, I will really be cutting it close. My hand beca a blur as I burned through sandpaper
“10, 9, 8.” before I knew it, the invigilator was counting down as I finished sanding my shortsword. “5, 4, 3.” having no ti, to check the effects themselves, I only had ti to run my mana thru the blade to make sure that all the mana copper traces were intact and feeding mana properly.
“2,1. All work and tools down, the practical exam has co to an end, if you are found to be still working, you will be disqualified from this exam and brought up on charges of academic dishonesty.”
As I looked down at my final product, it was a shortsword that had its flat side end up looking like a tal version of a modern circuit board.
The only difference was where a person in my previous world would expect to see resistors, capacitors, diodes, and other components, there were now runes and glyphs, and where other students were happy just to use a mana conductive ink to inscribe the runes, glyphs, and the traces that connected them, I took the risker route and used the cheapest mana conductive tal there was to do all my inscription onto the cheap steel shortsword.
Soon, Professor Bixby, his minder/warden Brunhilde, and an invigilator with a clipboard walked to the first table, Professor Bixby started inspecting the presented works and graded them as the invigilator with the clipboard wrote stuff down.
User Comments
0 comments from readers